Product Selection Center

Melamine Foam Product Selection Center

Start with the application, then confirm format, density, surface and processing route. This center connects Kangerna’s cleaning, acoustic, thermal and custom-conversion options so project teams can define the right sample before sourcing.

  • Application first
  • Exact grade confirmed
  • Sample before scale-up
01 · Choose a route

What should the melamine foam do?

Begin with the primary function of the part. A grade that performs well in one application is not automatically suitable for another, so the selection path should follow the job, environment and finished format.

ROUTE 01

Clean surfaces & maintain equipment

For hard-surface cleaning, floor care, polishing and composite cleaning tools. Confirm the substrate, pressure, wet-use conditions and acceptable wear before selecting a grade.

View cleaning products
ROUTE 02

Control sound & finish interiors

For wall, ceiling and decorative acoustic formats. Match panel construction, thickness, mounting method, edge detail and finish to the acoustic and interior requirement.

View acoustic products
ROUTE 03

Manage heat, moisture & fire risk

For thermal boards, pipe insulation, foil-laminated formats and projects with hydrophobic or low-formaldehyde requirements. Verify the exact model and its published test data.

View thermal products
ROUTE 04

Convert foam into a component

For CNC shapes, compression, adhesive backing, foil lamination, fabric or leather wrapping and composite cleaning tools. Selection depends on the drawing and approved reference.

View custom options
02 · Product families

Match the product family to the finished job

Use these families to shortlist a starting point. Product names help narrow the route, but the exact model, grade and construction still need to be confirmed against the drawing, sample and current technical information.

Cleaning & surface care

Cleaning products

For hard-surface cleaning, floor care, polishing, mop systems and composite cleaning tools. Select by substrate, pressure, wet or dry use and the acceptable wear pattern.

Start with: surface, pressure and wear requirement. Confirm: grade, density, shape and packaging on sample.

Acoustic & interior

Acoustic products

For wall, ceiling, decorative and fabricated acoustic formats. Compare the panel build, thickness, edge, mounting method and finish together rather than by color alone.

Start with: acoustic target and mounting detail. Confirm: model-specific NRC or absorption data, thickness, finish and fire documentation.

Thermal & industrial

Thermal and industrial products

For thermal boards, pipe insulation, foil-laminated formats and projects with hydrophobic, low-formaldehyde or higher-density requirements. Verify the exact grade and its conditions of use.

Start with: operating temperature, moisture and fire requirement. Confirm: grade-specific thermal, flame and environmental data.

Specialty & conversion

Specialty and custom products

Use this route when the foam becomes a component: CNC-cut, compressed, laminated, wrapped, adhesive-backed or combined with another material. Review the drawing and approved reference before production.

Start with: CAD drawing, target fit and mating material. Confirm: machinability, tolerances, adhesive or laminate, packing and approval sample.

03 · Selection matrix

Translate a project requirement into a shortlist

The matrix gives a practical starting point, not a final specification. Move from the requirement to a product route, then use current technical data and a sample to validate the exact grade and format.

Project requirement Start with Review next Confirm on sample or TDS
Hard-surface stain removal Magic sponge eraser formats Shape, compression, wet strength and wear Substrate compatibility, pressure, cleaning method and acceptable surface change
Acoustic wall or ceiling panel Sound-absorbing panels or fabricated foam cores Thickness, edge detail, facing and mounting Model-specific acoustic data, fire documentation and finish
Thermal board or equipment insulation Thermal board, roll or pipe format Density, thickness, foil facing and service temperature Thermal conductivity, temperature limits and installation conditions
Dimensional stability during converting High-density foam, 12–80 kg/m³ Density target, thickness range and cutting method Machining quality, tolerance, dust control and final fit
Parts exposed to moisture Hydrophobic melamine foam Water exposure mode, drainage and cleaning cycle Grade-specific hydrophobic performance and durability after repeated exposure
Lower-formaldehyde material preference Low-formaldehyde melamine foam Test method, target limit and component materials Current report for the selected grade and the full finished assembly
CNC shape, lamination or wrapped finish Specialty and conversion route Drawing, tolerance, adhesive, substrate and edge quality Approved drawing or reference sample, fit and handling requirements
A specific color or surface appearance White, grey or pink foam formats Base grade, color consistency and visible surface Color target, lighting condition, batch expectation and finish
04 · Material guide

Six variables to define before sampling

Product selection is a combination of material and format. Changing one variable can change handling, fit, acoustic behavior, thermal performance or the way the part is installed.

Density

Density affects handling, compression behavior, machining and the feel of the finished part. Kangerna publishes grades such as 8.0 ± 1.0 kg/m³ and 8.7 ± 1.5 kg/m³, while selected high-density products cover 12–80 kg/m³. Specify density with the exact model and test method.

Color

White, grey and pink are appearance choices and can differ by product line. Color alone does not establish density, acoustic performance, flame behavior or suitability for an application. Confirm the base grade and color together.

Pore structure

Regular, semi-grid and other visible structures can influence appearance, cleaning action and the way the surface accepts a laminate or coating. Match the structure to the visual and functional requirement, then validate it in the intended process.

Thickness & format

Sheet, block, roll, pipe and machined formats are not interchangeable. Some standard sheet options reach 2500 × 1250 mm, while selected high-density products are listed from 2–50 mm. Confirm the target dimensions and tolerances for the exact item.

Surface & attachment

Adhesive, aluminum foil, fabric, leather and composite constructions introduce extra interfaces. State the mating substrate, surface energy, service environment and installation method so the adhesive or laminate can be reviewed with the foam.

Fire & temperature

Flame and temperature information is grade- and construction-specific. Some product pages report GB8624 B1, UL94 V0 or HF-1, and some models list service temperatures from −200°C to +220°C or +240°C. Do not generalize these values to another product.

Acoustic examplesPublished constructions refer to NRC 0.9 at 80 mm and NRC 0.85 at 50 mm. Confirm the exact build and mounting condition.
Thermal exampleSelected thermal data lists conductivity at ≤0.35 W/(m·K). Validate the model, thickness and operating condition.
Moisture exampleThe hydrophobic product page reports a water-repellency rate of ≥98%. Define the exposure, test method and repeat-cycle expectation.
05 · Fit check

Know what is ready to quote and what needs validation

A good selection brief reduces avoidable sample cycles. It also separates a promising material direction from a construction that has already been tested for the intended use.

A good fit to start a technical review

The project has enough definition to review a material route, conversion method and approval sample.

  • The primary function is clear: cleaning, acoustics, thermal control or conversion.
  • The substrate, mating material and installation method are known.
  • Target dimensions, tolerances and a drawing or reference are available.
  • The preferred density, thickness, color and format have been shortlisted.
  • Surface treatment, adhesive, foil or wrapping requirements are stated.
  • The sample can be tested under conditions that represent the final use.

Requires specific validation before approval

These conditions can still be discussed, but they should not be approved from a generic product description.

  • Food-contact, skin-contact, medical, potable-water or other regulated applications.
  • Formal fire classification, building-code compliance or third-party certification.
  • Long-term chemical exposure, outdoor UV exposure or repeated wet cleaning.
  • Bonding to a difficult substrate or use of a customer-supplied adhesive.
  • An acoustic target quoted without thickness, air gap, mounting and facing details.
  • Continuous service near the published temperature limit or in a cyclic environment.
06 · Selection brief

What to send for a useful product review

A concise brief is more useful than a broad request for “the best foam.” The details below let the team compare the material and the finished component at the same time.

Project intake checklist

Include what is known and mark what is still open. Missing information can be handled as a review point rather than assumed.

  • Application, substrate and mating material
  • Finished dimensions, tolerances and drawing
  • Preferred grade, density and color
  • Format, thickness and edge requirement
  • Adhesive, foil, fabric or composite surface
  • Temperature, moisture, chemical and fire environment
  • Test standard, sample quantity and acceptance method
  • Packaging, handling and documentation requirement

Quality checks follow the approved route

Kangerna’s quality process uses incoming, in-process, final and outgoing checkpoints. The applicable inspection items are tied to the product and approved specification.

IQC
Incoming
IPQC
In process
FQC
Final check
OQC
Outgoing
07 · Selection questions

Questions before choosing a grade

Use these answers to frame the first technical review. The exact product data, current test documents and approved sample remain the deciding references.

How do I choose between white, grey and pink melamine foam?

Color is an appearance choice, not a performance grade. White, grey and pink melamine foam can differ in base grade, density, pore structure and available format. Ask for the exact model and current TDS, then compare the required cleaning, acoustic or thermal properties and approve the color on the intended material sample.

Which product should I start with for acoustic panels?

Start with the Sound-Absorbing & Flame-Retardant Panels group when the finished product is a wall or ceiling panel, or with the relevant foam sheet or block when the panel will be fabricated. Acoustic results depend on thickness, density, air gap, mounting and facing. Treat NRC figures as model-specific and confirm the complete build before specifying performance.

When should I choose compressed or high-density melamine foam?

Choose compressed melamine foam when the process or handling route requires a reduced initial thickness and the application can accept its recovery behavior. Consider high-density melamine foam when the drawing calls for greater dimensional support, machining control or a specific density within the 12–80 kg/m³ range. Neither option should be selected from density or compression alone; confirm the target, sample and test method.

Can Kangerna supply CNC shapes, adhesive, foil or fabric wrapping?

Yes. Kangerna can review CNC shaping and engraving, compression, PU or scouring-pad composites, adhesive backing, aluminum-foil lamination and fabric or leather wrapping. Send the drawing or reference, mating substrate, adhesive or finish requirement and target quantity. Feasibility and tolerances are confirmed through the technical review and approval sample, not from the product name alone.

What should I send before requesting product selection support?

Send the application, substrate or mating material, target dimensions and tolerances, drawing if available, preferred density or grade, thickness, color, surface or adhesive requirement, operating environment, relevant test standard, sample quantity and packaging expectation. This information lets Kangerna review the material and conversion route and define the sample to evaluate.

Need help narrowing the shortlist?

Share the application, drawing or target performance. Kangerna can review the material and conversion route and help define the next sample.

Laissez un message
Nom
E-mail *
Message
Nous utilisons Biscuit pour améliorer votre expérience en ligne. En poursuivant votre navigation sur ce site, vous acceptez notre utilisation des cookies. Biscuit .
Message Us